Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Colt Canada SAS IUR Uppers

  1. #1

    Colt Canada SAS IUR Uppers

    Quote Originally Posted by Nordic Marksman View Post
    Now taking pre orders!



    Colt Canada British Special Air Services (SAS) 3rd Gen Integrated Upper Receiver’s

    Production units to ship to SAS in 2017 – NOT SURPLUS OR OVER RUNS*
    Canadian civilian pricing same as Government contract price.


    DESCRIPTION:
    GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):
    Made for the UK Special Forces (SAS/SBS, etc.)
    Interchangeable fit on all Mil-Spec “push pin" lowers;
    Fully floating barrel system;
    Dry film lubricated bolt carrier channel;
    Screw retained (easily maintained) low profile gas block (under the handguard for safety);
    Mil-Spec hard anodized black;
    IUR is marked COLT CANADA 2C085 and NATO on the rail;
    Straight gas tube to increase life and ease of installation.

    BARREL:
    Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel;
    Canadian Forces Spec thicker chrome;
    Phosphated to Mil-Spec;
    Improved integral forged carbine chamber;
    Colt Canada hammer forged choke bore;
    1/7” twist RH/ 6 groove NATO approved bore;
    Batch marked barrel and barrel extension;
    High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec;
    Anti corrosion coating applied under the handguards;
    New liner to improve thermal protection of hands.

    FLASH HIDER:
    Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.

    RAILS:
    Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom);
    Reinforced grenade launcher recoil lug;
    The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side
    Rail slots are numbered with laser engraving;
    The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories;
    Protected low profile gas block;
    IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches

    BOLT CARRIER ASSEMBLY:
    Full Canadian Forces specification (Military configuration) bolt carrier assembly;
    Proof tested, MPI inspected, and lot number controlled bolt;
    CF spec high retention staking of the carrier key;
    Chrome lined carrier and key for wear resistance;
    Chromed firing pin.

    COLT CANADA TACTICAL CHARGING HANDLE:
    Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place;
    Solid latch pin is permanently staked in place for worry free operations;
    Mil-Spec finishes applied for weather resistance.

    PRICING
    Two barrel lengths;

    10.5” Integrated Upper Receiver (BCA+CH) – $1699.95
    15.7” Integrated Upper Receiver (BCA+CH) – $1779.95


    Delivery first week of October.

    *All SAS uppers sold in the Canadian civilian market will be replaced for the SAS order prior to delivery in 2017. Product is already sold to the SAS, therefore not discounted like previous Danish surplus.






    Another Colt Canada offering I'll be sitting out on because I have my gun money tied up in precision stuff right now, lol!
    “The greatest happiness is to scatter your enemy, to drive him before you, to see his cities reduced to ashes, to see those who love him shrouded in tears, and to gather into your bosom his wives and daughters.”

  2. #2
    That's pretty cool. But... I think I'll be sticking with my Danish over runs. I like the QR sling point on the side . Also with the MRR being released....

  3. #3
    The SAS upper sits better in your hand than the Danish uppers. But would have been a perfect desire if it had that rear QD mounts at the 3 and 9 o'clock position.

  4. #4
    I still kind of want to get one of these, at least the 15.7" version, a bit much for just the upper though.
    “The greatest happiness is to scatter your enemy, to drive him before you, to see his cities reduced to ashes, to see those who love him shrouded in tears, and to gather into your bosom his wives and daughters.”

  5. #5
    Quote Originally Posted by mister donut View Post
    I still kind of want to get one of these, at least the 15.7" version, a bit much for just the upper though.
    I think the $600 Danish over run uppers were a pretty good bargain. Of course we got stung on the lowers and BCG but overall I managed to keep the cost fairly reasonable. I was able to build an entire C8 Colt Canada rifle for about the price of just one of these uppers. Maybe even less.

    But, they are still fairly cool. Especially the 10.5 option.

  6. #6
    Quote Originally Posted by Full Metal Jacket View Post
    I think the $600 Danish over run uppers were a pretty good bargain. Of course we got stung on the lowers and BCG but overall I managed to keep the cost fairly reasonable. I was able to build an entire C8 Colt Canada rifle for about the price of just one of these uppers. Maybe even less.

    But, they are still fairly cool. Especially the 10.5 option.
    I have both. I bought the 10.5" upper when SFRC had a 15% off with free shipping offer (keep in mind the 10.5" upper included the CC FA BCG and charging handle, so it's not quite as over priced as some think). Of the two uppers, I must say, the 10.5" sees more trigger time than the 15.7" - it is, for me, just more fun. I have both uppers on CC lowers, the first one I purchased at the original fever price, but the second lower cost less than $200, so quite reasonable for a premium receiver. Just my thoughts, YMMV.

  7. #7
    Quote Originally Posted by Ponymusic View Post
    I have both. I bought the 10.5" upper when SFRC had a 15% off with free shipping offer (keep in mind the 10.5" upper included the CC FA BCG and charging handle, so it's not quite as over priced as some think). Of the two uppers, I must say, the 10.5" sees more trigger time than the 15.7" - it is, for me, just more fun. I have both uppers on CC lowers, the first one I purchased at the original fever price, but the second lower cost less than $200, so quite reasonable for a premium receiver. Just my thoughts, YMMV.
    Good stuff. That 10.5 would be fairly handy. Pictures?

  8. #8
    I think I'd want the SAS 15.7" because it looks to me like the handguard is longer than the Danish version?
    “The greatest happiness is to scatter your enemy, to drive him before you, to see his cities reduced to ashes, to see those who love him shrouded in tears, and to gather into your bosom his wives and daughters.”

  9. #9
    Quote Originally Posted by Full Metal Jacket View Post
    Good stuff. That 10.5 would be fairly handy. Pictures?
    I could take some photos, but I'm one of those Luddites that never bothered to learn how to post pictures on forums.

  10. #10
    Quote Originally Posted by Ponymusic View Post
    I could take some photos, but I'm one of those Luddites that never bothered to learn how to post pictures on forums.
    Just go to imgur.com create a profile. You then hit the upload feature which allows you to browse your hard drive. Find where you saved the image and double click on it. This will upload the image to your library. Now go to the picture. You'll see about 5 lines with code. Click on the one that says direct and copy that line. Now on this site, hit that photo button on the top reply bar. It's right next to the movie one. Paste that URL line that you copied. Post and you are done. It's a lot easier than it actually sounds.

    Photobucket used to be the same, but they decided to ransom ware that service now. So avoid them like the plague!!

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •